Hi Editor,
I have explained the outages we get in the thread: Site Slow and some Dropouts - Your Help
We have fixed the slow issues, now I only need to fix the dropout issue, which I believe is in part due to malicious behaviour.
When Starlink is able to provide a Static IP Address, the dropout issue will be greatly reduced.
It should be obvious that the device is over... by the look of the eye. And now working with a small load with very low COP
Editor, statements you have made concern me!
It should be obvious to any Member, that the Conventional Transformer is between 85 and 95% Efficient! L1 and L2 make up the beginnings of a Conventional Transformer, so any experiment should be at minimum 85 to 95% efficient!
With this very easy to achieve efficiency, it is not hard to calculate that an extra 15% makes Unity! 20% gives 105% and so on!
Thus:
So any Experiment should be at minimum 85 to 95% efficient, and when the right polarity is obtained, it is easy to make L3 add Energy to the System well Above-Unity as has been shown by Many Independent Replications for many Years now!
This advice has been given to you on several occasions now also, from a few different members.
If you're not able to reach 85 to 95% efficiency with L1 and L2, then you need to go back and study Transformer Technology! We are not here to help with Conventional Science Basics. Sorry, but we do not offer this sort of schooling!
If you are serious about this subject, and you feel confident about taking on a slightly simpler project, then you're welcome to join, but please understand, you need the basics first! Before you start!
Conventional Electromagnetic Induction is one of the most Efficient Scientific Transformations known in Science today! Its been known for some 200 odd years! All we have done is add a small part to make Electromagnetic Induction Complete which is evidenced in many videos:
Success comes from the Will to Succeed and Failure comes from the Will to Fail!
Light up the darkness!
Best Wishes,
Chris